How to Remove Plasti Dip from Rims: The Ultimate Guide

Hey there, fellow car enthusiasts! If you’re reading this, you’ve probably ventured into the world of Plasti Dip to give your rims that unique look. Plasti Dip is fantastic for enhancing your vehicle’s appearance, but what happens when it’s time to bid farewell to that matte finish? Fear not, because I’ve personally taken on the challenge of removing Plasti Dip from rims and have got you covered.

 In this comprehensive guide, I’ll share my hands-on experience and insights on how to remove Plasti Dip from rims effectively, without damaging your precious rims.

The Challenges of Removing Plasti Dip

Before we dive into the nitty-gritty of Plasti Dip removal techniques, let’s talk about the challenges you might encounter. Plasti Dip, while an excellent temporary solution for changing your rim’s appearance, can be a bit stubborn when it comes to saying goodbye. Here are a few common challenges:

• Adhesion: Plasti Dip adheres well to surfaces, making it a pain to peel off.
• Residue: Sometimes, Plasti Dip leaves behind a sticky residue that’s a pain to remove.
• Multiple Coats: If you’ve applied multiple coats, removing them can be time-consuming.
• Time-Consuming: Removing Plasti Dip can be time-consuming, especially if not done correctly.

But fret not! I’ve tested various techniques to make this process as painless as possible.

What Techniques to Avoid When Removing Plasti Dip from Cars

Let’s start with a few techniques that you should steer clear of:

• Scratching: Avoid using sharp objects or abrasive materials to scrape off Plasti Dip. It can damage your rims.
• Peeling Dry: Trying to peel off Plasti Dip when it’s too dry can result in bits getting stuck.
• Using Harsh Chemicals: Some chemicals can damage your rims or your car’s finish. Avoid them.

Now, let’s get into the meat of the matter – the techniques that work.

Peel off as Much as You Can

To peel off Plasti Dip from your rims, gently start at an edge or corner with your fingers. Slowly work your way around the coated area, applying even pressure. Plasti Dip is designed to peel away from surfaces easily, so it should come off in large sections. If it resists or tears, don’t force it; work around the edges until you can grab a good piece. Continue peeling until you’ve removed as much as possible. This initial peeling step helps reduce the amount of residue left behind, making the overall removal process more manageable.

How to Remove Plasti Dip With WD-40

To remove Plasti Dip with WD-40, start by generously spraying WD-40 onto the coated area. Let it sit for 5-10 minutes to soften the Plasti Dip. Then, gently peel off the softened Plasti Dip using a plastic scraper or card, beginning at an edge. Wipe away the residue with a cloth and use an adhesive remover if needed. Rinse the rims and dry them thoroughly. Remove any remaining residue and inspect for completeness. This method works effectively, but caution is crucial to prevent damage to the rims. Patience and thorough cleaning ensure a successful removal of Plasti Dip using WD-40.

How to Remove Plasti Dip With Mineral Turpentine

To remove Plasti Dip with mineral turpentine, follow these steps:

• Apply mineral turpentine to the Plastic Dip-coated surface, ensuring thorough coverage.
• Allow it to sit for 5-10 minutes to soften the Plasti Dip.
• Gently use a plastic scraper or old credit card to peel off the softened Plasti Dip, starting at an edge.
• Wipe away any remaining residue with a cloth, using soap and water if needed.
• Rinse the rims with water and ensure they are completely dry.
• Inspect for any remaining Plasti Dip and repeat the process if necessary.
• Remove any masking tape used to protect surrounding areas.

Exercise caution to avoid damaging the rims, and patience is key for a successful Plasti Dip removal with mineral turpentine.

How to Remove Plasti Dip With Goo-Gone

To remove Plasti Dip with Goo Gone, follow these steps:

• Apply Goo Gone generously to the Plastic Dip-coated surface, ensuring thorough coverage.
• Allow it to sit for a few minutes to penetrate and soften the Plasti Dip.
• Gently use a plastic scraper or an old credit card to peel off the softened Plasti Dip, starting at an edge.
• Remove any lingering residue using a cloth.
• Clean the rims with soap and water to remove any Goo Gone residue.
• Rinse and dry the rims thoroughly.
• Inspect for any remaining Plasti Dip, and repeat the process if needed.

Goo Gone is effective, but take care to avoid damaging the rims and be patient for the best results.

How to Remove Plasti Dip With Dip Dissolver

To remove Plasti Dip with Dip Dissolver, follow these steps:

• Apply Dip Dissolver liberally to the Plastic  Dip-coated surface.
• Allow it to sit for approximately 5-10 minutes, letting it penetrate and soften the Plasti Dip.
• Gently use a plastic scraper or old credit card to peel off the softened Plasti Dip, starting at an edge.
• clean any remaining residue with a cloth.
• Clean the rims with soap and water to remove any Dip Dissolver residue.
• Rinse and dry the rims thoroughly.
• Inspect for any remaining Plasti Dip, and repeat the process if necessary.

Exercise care to prevent rim damage, and this method should effectively remove Plasti Dip using Dip Dissolver.

Can Plasti Dip Be Removed Professionally?

Yes, Plasti Dip can indeed be removed professionally. Opting for professional Plasti Dip removal services can be an excellent choice for those who want a worry-free and flawless outcome.

Professional technicians are well-versed in the art of Plasti Dip removal, equipped with specialized tools and expertise to ensure that your rims are restored to their original state without a scratch. They know how to apply the right techniques and products, minimizing any risk of damage to your rims or your vehicle’s finish.

Moreover, professional services often come with a guarantee, offering peace of mind that the job will be done correctly. While it may come at a cost, the convenience, quality, and assurance of professional Plasti Dip removal make it a viable option for those who want the best results without the DIY effort.

So, if you’re looking for a hassle-free, expert solution to remove Plasti Dip from your rims, consider the services of a professional.

Conclusion

In conclusion, removing Plasti Dip from your rims can be a straightforward DIY project or a task best left to the professionals, depending on your comfort level and resources. From personal experience, methods like WD-40 and Goo-Gone can effectively dissolve and peel away Plasti Dip, restoring your rims to their original glory. However, remember that patience and care are key to avoiding damage. 

Alternatively, professional removal services offer a hassle-free, guaranteed solution for a pristine finish. Whether you choose the DIY route or seek professional help, with the right approach, your rims will soon regain their sleek and original appearance.